Thanks!
Maybe a little bit intricated for dummy user
Bye,
Rudy
| EyesWeb XMI Forum http://forum.eyesweb.infomus.org/ |
|
| Two webcam http://forum.eyesweb.infomus.org/viewtopic.php?f=24&t=87 |
Page 1 of 1 |
| Author: | ydur [ 03 Mar 2009, 23:31 ] |
| Post subject: | Two webcam |
Hi there, First of all...Congratulations!! I'm happy to discover this new forum for Eyesweb!! I work with Eyesweb since 4 years. Actually I use the 3.3.0 version because the 4.x was unstable and sometime amazing behavior (!!) for my purpose. Now XMI seem more stable and usable! My question is: - How it is possible to open two webcam at the same time? Indded, in the block "Frame Grabber" there is the parameter "Device" but I cannot see the list of connected video input so I don't know how to put there. Thank you in advance, Rudy |
|
| Author: | ydur [ 06 Mar 2009, 11:49 ] |
| Post subject: | Re: Two webcam |
I would pinpoint that the question is about EyesWeb XMI 5.0.2. Rudy |
|
| Author: | paolo [ 09 Mar 2009, 03:07 ] |
| Post subject: | Re: Two webcam |
If you have two webcams installed in your system, you should see them in the eyesweb control panel (see Tool->Options, then Advanced->Device Mapping). In the control panel you can assign a name of your choice to each of them; then, specifying exactly the same name in the device parameter of the block, you should be able to use both of them. Paolo |
|
| Author: | ydur [ 09 Mar 2009, 12:17 ] |
| Post subject: | Re: Two webcam |
Thanks! Maybe a little bit intricated for dummy user Bye, Rudy |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|